We at Growblogs love our booze (in moderation, most of the time), and from the very start one of our main goals was to grow and produce our own booze. Ive always fancied the idea of homebrew, experimenting with flavours and techniques to make different wines, ciders and ales, so when I start a new project, I do what I always do and buy a good book and start reading. I already collect the River Cottage Handbook series, so the addition of the booze edition was a must. It is written by John Wright, who you will probably know from the River Cottage Series, as the foraging guy who makes booze from things he finds in hedges, and Hughs rosey red cheeked drinking buddy. They always seem to be sloshed and having a laugh so I know I will be getting good advice.
With an ample supply of free apples this time of year, we decided to start by making cider. I purchased a home brewing kit with all the accessories needed as well as a couple of demi-Johns to store the cider in. I organised and collected some crab apples from my parents garden. Then when I sat down to read the process, I stumbled at the first block with the lack of an apple press. After a quick google I soon realised that a decent cheap one would cost around £70 and would take 2 weeks to deliver. I did not want to be spending that sort of money on something that would get used so little, so after more googling, I found that making my own was the way to go. Our booze filled plans are back on track.
An apple press is a machine used to separate the juice from the rest of the fruit through the exertion of pressure on apple pulp. There are many different variations of this design online, I decided to use a bottle jack because I had one in the shed and barely used it.
The buckets that we purchased are known as plasterers buckets, they are tougher than normal buckets and hold a much larger quantity. We drilled holes in the bucket to allow the juiced to drop down into the vessel below. We recommend using a wood drill bit when boring holes in plastic as it is less likely to crack the bucket and lives a nice round clean hole.
The timber frame needs to be strong, we used 3” x 1 ½ “ rough timber, and bolted and screwed the pieces together to make sure that it will take the pressure of the 1 ton jack.
There are much more detailed plans to make something similar to this online if your not the most DIY minded, but I think its pretty straight forward. Hopefully this weekend will provide us with good weather and the opportunity to test it out.